8LSA35.DA030S000-3

8LSA35.DA030S000-3 is a B & R Automation motor in the 8LS Synchronous Motors series. Its 8LSA designation indicates a standard configuration without a reinforced bearing. The motor uses three-phase synchronous operation and has a rated speed of 3000 rpm. Length code 5 identifies its mechanical length, while the mounting flange and 91.3 mm flange dimension provide the mounting interface. 

The motor is self-cooled through free air circulation, so it does not require a separate forced-cooling system. It uses a connector with a hybrid single-cable solution to carry the required motor and feedback connections. The inductive EnDat encoder uses EnDat 2.2 communication for position feedback. Its single-turn capability and 19-bit single-turn resolution measure position within one shaft revolution; the 0-bit multi-turn value indicates that revolutions are not tracked beyond a single turn.

The shaft end is smooth for connection to compatible mechanical components. A holding brake is not present, so the motor does not provide brake-based shaft holding when unpowered. An oil seal is also not present, which should be considered where shaft sealing against oil is required.