CSH01.3C-NN-EN2-EN2-CCD-NN-S-NN-FW

CSH01.3C-NN-EN2-EN2-CCD-NN-S-NN-FW is a Bosch Rexroth Indramat controller in the CSH Advanced Controllers series. Its base power consumption is 8.5 W. The typical inrush current is 4 A, with a maximum inrush pulse duration of 100 ms. The analog input supports a ±10 V range and has 160 kΩ resistance for receiving analog signals. The analog output provides 5 V at 1 mA for low-current analog signaling. Digital outputs are rated for 24 V and 0.5 A, while the relay contacts are rated for 24 V DC and 1 A to switch compatible loads.

The controller has two encoder interfaces supporting EnDat 2.1, 1 Vpp, and 5 V TTL signals, allowing connection to compatible feedback devices. Cross communication uses a SERCOS III master interface for communication with connected automation equipment. The unit is not equipped with a control communication interface. Its engineering interface uses 100Base-TX through an eight-pin RJ-45 connector for configuration and diagnostic access, and the maximum engineering cable length is 100 m. An RS232 serial interface supports point-to-point communication with compatible devices.