HDS13.2-W075N

HDS13.2-W075N is manufactured by Bosch Rexroth Indramat as part of the HDS Drive Controllers series. It is version 2 and uses a built-in internal air blower to remove operating heat. The protection category is IP10. Its insulation classification is C in accordance with DIN VDE 0110.

The controller has a rated current and peak current of 75 A. It supplies 40 A of continuous current at a 4 kHz switching frequency and 30 A at 8 kHz. Power loss at continuous current is 220 W, while the signal-processing circuitry consumes 25 W. The analog output provides a 4 mA current signal. The ready contact supports a DC 24 V, 1 A load and requires a minimum load of 10 mA for reliable switching.

The permissible ambient temperature range is +5 to +45ºC. Operation at reduced ratings is permitted up to a maximum ambient temperature of +55ºC. The storage and transport temperature range is -30 to +85ºC, and the permitted installation elevation is 1,000 m above sea level. The unit weighs 11 kg. At the X5 connection, the DC bus terminal requires a tightening torque of 3 Nm, while the motor connection requires 2 Nm.