MHD071B-035-PG1-UN

MHD071B-035-PG1-UN is a Bosch Rexroth Indramat motor from the MHD Synchronous Motors series. The motor is size 071, has length B, and uses winding code 035. It produces 8.0 Nm of continuous torque at standstill. Its 115 mm flange and 95 mm centering diameter provide the mechanical dimensions needed for mounting and alignment.

The motor uses digital servo feedback with an integrated encoder to provide position data to the control system. Position detection is absolute over more than 4,096 revolutions, allowing the system to retain multi-turn position information. The encoder uses an optical measurement method and provides a system accuracy of ±0.5 angular minutes. Power and feedback connectors carry the electrical supply and feedback signals, and the power connection can be turned through a 270° range to support different cable-routing positions.

The plain shaft provides a direct mechanical connection to the driven equipment, and a shaft seal is included. The integrated holding brake supplies 5.0 Nm of holding torque to secure the shaft when required. The housing dissipates heat through natural convection without forced-air cooling. Its IP65 protection rating provides resistance to dust ingress and water jets, while the insulation class is F.

The permitted operating ambient temperature range is 0 to 40ºC, and the storage temperature range is -20 to +80ºC. The maximum setup height is 1,000 m above mean sea level.