MHD071B-035-PP0-UN

MHD071B-035-PP0-UN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 071, its length is B, and its winding code is 035. It provides 8.0 Nm of continuous torque at standstill. The 115 mm flange and 95 mm centering diameter support mechanical mounting. Its keyed shaft provides a positive connection to the driven component, while the fitted shaft seal helps prevent contaminants from entering around the shaft. The motor does not include a holding brake.

Digital servo feedback with an integrated encoder supplies position information. Position detection is absolute over more than 4,096 revolutions, allowing the drive system to retain multi-turn position data. The encoder uses an optical measurement method and has a system accuracy of ±0.5 angular minutes. Power and feedback connectors provide the electrical connections, and the power connection can be turned within a 270-degree range to accommodate cable routing.

The housing uses natural convection to dissipate heat without a forced-air cooling system. Its IP65 degree of protection provides a dust-tight enclosure and protection against water jets. Class F insulation supports the motor’s thermal requirements. The permitted operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum installation elevation is 1,000 m above mean sea level.