MHD093B-035-NG0-BN

MHD093B-035-NG0-BN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 093 with length B, and its winding code is 035. It produces 17.5 Nm of continuous torque at standstill. The housing uses natural convection to dissipate heat without a forced-air cooling system. Its operating ambient temperature range is 0 to 40ºC, while its storage temperature range is -20 to +80ºC. The maximum setup height is 1000 above mean sea level. Class F insulation provides the motor’s thermal insulation rating, and the IP65 protection rating indicates a dust-tight enclosure protected against water jets.

The motor has digital servo feedback (HSF) for position and motion feedback. Position detection is relative, the measurement method is optical, and system accuracy is ±0.5 angular minutes. The plain shaft provides a direct mechanical coupling surface, and a shaft seal helps prevent contaminants from entering around the shaft. The motor does not include a holding brake.

For mechanical installation, the centering diameter is 130 mm and the flange size is 140/150 mm. The power connection uses an output connector directed toward side B, establishing the connector type and cable-routing orientation.