MHD093B-035-NP0-BA

MHD093B-035-NP0-BA is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 093, its length is B, and the winding code is 035. It produces 17.5 Nm of continuous torque at standstill. Natural convection cools the housing without a powered fan, and the insulation class is F.

The motor uses digital servo feedback (HSF) for relative position detection. Position measurement is optical, with a system accuracy of ±0.5 angular minutes. The shaft has a keyed design for transmitting torque to a coupled component, and a shaft seal is included. The motor does not have a holding brake.

The flange size is 140/150 mm, and the centering diameter is 130 mm for alignment during installation. Power is supplied through an output connector directed toward side B. The IP65 degree of protection provides a dust-tight enclosure and protection against water jets. The permitted operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1,000 m above sea level.