MHD112B-024-NP0-AN

MHD112B-024-NP0-AN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 112 with length B and winding code 024. It produces 28.0 Nm of continuous torque at standstill. Its 192 mm flange and 130 mm centering diameter provide the mounting interface. Natural convection dissipates operating heat without forced-air cooling, while insulation class F provides the motor’s thermal insulation rating.

The digital servo feedback encoder uses HSF feedback for motor control. Position detection is relative, the measurement method is optical, and system accuracy is ±0.5 angular minutes. The keyed shaft supports torque transfer through a key connection, and the shaft seal helps prevent contaminants from entering around the shaft. The motor does not include a holding brake.

Power is connected through an output connector directed toward side A. The IP65 degree of protection makes the enclosure dust-tight and resistant to water jets. The permitted operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1000 above mean sea level.