MHD112B-024-NP0-LN

MHD112B-024-NP0-LN is a Bosch Rexroth Indramat servo motor in the MHD Synchronous Motors series. The motor is size 112 with length B and winding code 024. It provides 28.0 Nm of continuous torque at standstill. The housing uses natural convection to dissipate heat without forced-air cooling, and the motor operates at ambient temperatures from 0 to 40ºC. Its storage temperature range is -20 to +80ºC, and its maximum setup height is 1000 above mean sea level. Class F insulation provides the motor’s thermal insulation rating, while the IP65 protection rating indicates a dust-tight enclosure protected against water jets.

The motor uses digital servo feedback (HSF) with optical measurement for position feedback. Position detection is relative, and the feedback system has an accuracy of ±0.5 angular minutes. The shaft is keyed for torque transmission to a coupled component and includes a shaft seal. No holding brake is installed.

The flange measures 192 mm, and the centering diameter is 130 mm for mechanical alignment during installation. Electrical power is supplied through a power connector, and the power connection is directed to the left.