MHD112B-024-NP0-RN

MHD112B-024-NP0-RN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 112 with length B and winding code 024. It produces 28.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter provide the mounting interface.

The digital servo feedback encoder uses high-resolution servo feedback (HSF) for relative position detection. Position is measured optically with a system accuracy of ±0.5 angular minutes. The keyed shaft supports torque transfer through a fitted key, and the shaft seal helps prevent contaminants from entering around the shaft. The motor does not include a holding brake.

The housing uses natural convection to dissipate heat without forced-air cooling. Its degree of protection is IP65, providing a dust-tight enclosure and protection against water jets. The insulation class is F. The permitted operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1,000 m above mean sea level.

Electrical power is supplied through a power connector. The power connection is directed to the right to establish the connector orientation during installation.