MHD112B-024-PG1-AN

MHD112B-024-PG1-AN is a Bosch Rexroth Indramat servo motor in the MHD Synchronous Motors series. The motor is size 112, its length is B, and its winding code is 024. It has a 192 mm flange and a 130 mm centering diameter for mechanical installation. The plain shaft includes a shaft seal, which helps protect the shaft opening from contaminants. The motor produces 28.0 Nm of continuous torque at standstill.

Digital servo feedback with an integrated encoder supplies motor-position data. Position detection is absolute over more than 4,096 revolutions, allowing the system to retain multi-turn position information. The encoder measures position optically and has a system accuracy of ±0.5 angular minutes. A holding brake is included and provides 22.0 Nm of holding torque to secure the shaft when required.

The housing uses natural convection to dissipate heat without forced-air cooling. Its degree of protection is IP65, providing dust-tight protection and resistance to water jets. The insulation class is F. The operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1,000 m above mean sea level.

Power is supplied through an output connector, and the power connection is directed toward side A to establish the connector orientation.