MHD112B-024-PP0-LN

MHD112B-024-PP0-LN is a Bosch Rexroth Indramat servo motor in the MHD Synchronous Motors series. The motor is size 112, its length is B, and its winding code is 024. It produces 28.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter provide the mounting interface. Its keyed shaft supports torque transfer to a keyed coupling, and the shaft seal helps prevent contaminants from entering around the shaft.

The motor uses digital servo feedback with an integrated encoder for position and motion feedback. Position is measured optically, with a system accuracy of ±0.5 angular minutes. Absolute position detection covers more than 4,096 revolutions, allowing multi-turn position tracking. The motor does not include a holding brake. Its power connector is directed to the left for cable routing.

The housing uses natural convection to dissipate heat without forced-air cooling. Class F insulation provides the motor’s thermal insulation rating. The IP65 degree of protection makes the enclosure dust-tight and resistant to water jets. The operating ambient temperature range is 0 to 40ºC, while the storage range is -20 to +80ºC. The maximum setup height is 1000 above mean sea level.