MHD112B-048-NP1-BN

MHD112B-048-NP1-BN is a Bosch Rexroth Indramat servo motor in the MHD Synchronous Motors series. The motor is size 112, its length is B, and its winding code is 048. It provides 28.0 Nm of continuous torque at standstill. The housing uses natural convection to dissipate heat without a powered cooling fan. Its operating ambient temperature range is 0 to 40ºC, while its storage temperature range is -20 to +80ºC. The maximum installation elevation is 1,000 m above mean sea level, and the insulation class is F.

The motor uses digital servo feedback (HSF) for control feedback. Position detection is relative and uses an optical measurement method. The feedback system has an accuracy of ±0.5 angular minutes, supporting precise position measurement. A holding brake is installed and provides 22.0 Nm of holding torque to retain the shaft position when required.

The motor has a keyed shaft for transmitting torque through a keyed mechanical connection, and a shaft seal is included. Its flange measures 192 mm, and the centering diameter is 130 mm for alignment during mounting. The power connection uses an output connector directed toward side B. An IP65 degree of protection provides a dust-tight enclosure and protection against water jets.