MHD112B-058-NG0-BN

MHD112B-058-NG0-BN is a Bosch Rexroth Indramat servo motor in the MHD Synchronous Motors series. The motor is size 112, its length is B, and its winding code is 058. It produces 28.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter provide the mechanical dimensions required for mounting.

The motor uses digital servo feedback (HSF) for control feedback. Position detection is relative, and the optical measurement method reads position through optical sensing. System accuracy is ±0.5 angular minutes. The motor has a plain shaft with a shaft seal, while no holding brake is included.

The housing uses natural convection to dissipate heat without forced-air cooling. Its IP65 degree of protection provides a dust-tight enclosure and resistance to water jets. Class F insulation provides the motor's thermal insulation rating. The operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1,000 m above mean sea level.

Power is connected through an output connector, and the connection is directed toward side B for cable routing.