MHD112B-058-NP0-BN

MHD112B-058-NP0-BN is manufactured by Bosch Rexroth Indramat as part of the MHD Synchronous Motors series. The motor is size 112, its length is B, and its winding code is 058. It produces 28.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter provide the mounting interface.

The motor uses digital servo feedback (HSF) for motion feedback. Position detection is relative, measurement is performed optically, and system accuracy is ±0.5 angular minutes. The keyed shaft supports torque transfer through a key connection, while the shaft seal helps protect the shaft opening. No holding brake is installed.

Natural convection dissipates operating heat without forced-air cooling. The insulation class is F, and the IP65 degree of protection provides a dust-tight enclosure protected against water jets. The permitted operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1000 above mean sea level.

Power is connected through an output connector, and the power connection is directed toward side B.