MHD112B-058-PP0-BN

MHD112B-058-PP0-BN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 112 with length B and winding code 058. It provides 28.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter support mechanical alignment and mounting.

The keyed shaft provides positive torque transfer, while the shaft seal helps prevent contaminants from entering around the shaft. This model does not include a holding brake. Its housing uses natural convection to dissipate heat without forced-air cooling. The IP65 degree of protection guards the enclosure against dust and water jets, and the insulation class is F.

Digital servo feedback with an integrated encoder supplies motor position information. Position is detected optically and uses absolute detection over more than 4,096 revolutions, allowing the position to be retained across a multi-turn range. System accuracy is ±0.5 angular minutes. The power connection uses an output connector directed toward side B, which determines the connection location and cable-routing direction.

The operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1,000 m above mean sea level.