MHD112C-035-NP0-BN

MHD112C-035-NP0-BN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 112, has length C, and uses winding code 035. It produces 38.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter provide the dimensions required for mounting and alignment.

The motor uses digital servo feedback (HSF) for position feedback. Position is detected relatively using an optical measurement method, and the feedback system has an accuracy of ±0.5 angular minutes. The keyed shaft supports torque transfer through a mechanical key, while the shaft seal helps prevent contaminants from entering around the shaft. No holding brake is installed.

The housing uses natural convection to dissipate heat without a powered cooling fan. The motor has Class F insulation and an IP65 degree of protection, which provides a dust-tight enclosure and protection against water jets. It operates at ambient temperatures from 0 to 40ºC and can be stored at temperatures from -20 to +80ºC. The maximum setup height is 1,000 m above mean sea level.

Power is connected through an output connector, and the connection is directed toward side B for cable routing.