MHD112C-035-NP0-LN

MHD112C-035-NP0-LN is a Bosch Rexroth Indramat servo motor in the MHD Synchronous Motors series. The motor is size 112, its length is C, and it uses winding code 035. It produces 38.0 Nm of continuous torque at standstill. The housing relies on natural convection to dissipate operating heat, while the IP65 degree of protection guards against dust and water jets.

The motor uses digital servo feedback (HSF) with optical measurement and relative position detection. This feedback arrangement measures changes in shaft position with a system accuracy of ±0.5 angular minutes. The keyed shaft supports torque transfer through a matching keyway, and the shaft seal helps prevent contaminants from entering around the shaft. The motor does not have a holding brake.

The power connection uses a power connector oriented to the left. The motor has a 192 mm flange and a 130 mm centering diameter for mechanical installation. Its maximum setup height is 1000 above mean sea level. It is designed for operation at ambient temperatures from 0 to 40ºC and storage at ambient temperatures from -20 to +80ºC. The insulation is Class F.