MHD112C-035-NP3-BN

MHD112C-035-NP3-BN is a Bosch Rexroth Indramat motor in the MHD Synchronous Motors series. The motor is size 112, its length is C, and its winding code is 035. It produces 38.0 Nm of continuous torque at standstill. The 192 mm flange and 130 mm centering diameter provide the dimensions needed for mechanical mounting. Its keyed shaft supports torque transfer through a key connection, while the shaft seal helps prevent contaminants from entering around the shaft.

The digital servo feedback (HSF) encoder uses optical measurement and relative position detection. Its system accuracy is ±0.5 angular minutes, supporting precise position feedback. The motor includes a holding brake rated for 70.0 Nm, which holds the shaft stationary when applied. Power is connected through an output connector directed toward side B.

The housing uses natural convection to dissipate heat without a powered fan. Its IP65 degree of protection provides a dust-tight enclosure and resistance to water jets. Class F insulation supports the motor’s thermal operating requirements. The permitted operating ambient temperature range is 0 to 40ºC, while the storage temperature range is -20 to +80ºC. The maximum setup height is 1000 above mean sea level.