MKD071B-035-KP0-KN

MKD071B-035-KP0-KN is a Bosch Rexroth Indramat motor in the MKD Synchronous Motors series. The motor is size 071 with a B length and uses winding code 035 for its winding configuration. It produces 8.0 Nm of continuous torque at standstill, supporting sustained load holding and low-speed operation. The permissible ambient temperature is 0-40ºC, and the insulation class is F.

The 115 mm flange and 95 mm centering diameter provide the mounting and alignment surfaces for installation. The shaft has a keyway for transferring torque through a keyed mechanical connection. A shaft seal is included to help prevent contaminants from entering around the shaft. The IP65 protection category provides dust-tight protection and resistance to water jets. This model does not include a holding brake.

Resolver feedback with an integrated encoder supplies motor position and motion data to the drive. Position detection is absolute over more than 4096 revolutions, allowing the control system to retain multi-turn position information. System precision is ±8 angular minutes. Electrical wiring is routed toward side B through a connection box, which provides the termination point for the motor connections.