MKD112C-058-KP0-AN

MKD112C-058-KP0-AN is a Bosch Rexroth Indramat servo motor in the MKD Synchronous Motors series. The motor is size 112, has length C, and uses winding code 058. It produces 38.0 Nm of continuous torque at standstill for sustained load holding and low-speed operation. Its permissible ambient temperature range is 0–40ºC, and class F insulation provides electrical insulation for the motor windings.

The resolver-feedback system includes an integrated encoder for rotor-position monitoring. Absolute position detection tracks movement over more than 4,096 revolutions, while system precision is ±8 angular minutes. The motor has no holding brake, so it does not mechanically retain the shaft when power is removed.

The output connector is directed toward side A to establish the cable-routing orientation. A shaft with a keyway supports keyed mechanical coupling to the driven equipment, and the installed shaft seal limits contaminant entry around the shaft. The IP65 protection category provides a dust-tight enclosure and protection against water jets.

The mounting interface has a 192 mm flange and a 130 mm centering diameter. The flange provides the motor’s mounting surface, while the centering diameter aligns it with the connected machine.