MKD112C-058-KP3-BN

MKD112C-058-KP3-BN is a Bosch Rexroth Indramat motor in the MKD Synchronous Motors series. The motor is size 112, has length C, and uses winding code 058. It produces 38.0 Nm of continuous torque at standstill, supporting sustained loads when the shaft is not rotating. Its permissible ambient temperature range is 0–40ºC, and its insulation class is F.

The motor uses resolver feedback with an integrated encoder for motion feedback. Absolute position detection covers more than 4,096 revolutions, allowing the drive system to retain multi-turn shaft-position information. System precision is ±8 angular minutes. A holding brake is included and provides 70 Nm of braking torque to hold the shaft in place when required.

The shaft has a keyway for mechanically coupling the motor to driven equipment, and a shaft seal is fitted to help prevent contaminants from entering around the shaft. The IP65 protection category provides dust-tight protection and resistance to water jets. The motor has a 192 mm flange and a 130 mm centering diameter for mounting and alignment. Its electrical connection uses an output connector oriented toward side B.