PPC-R01.2N-N-L2-FW

PPC-R01.2N-N-L2-FW is a Bosch Rexroth Indramat unit in the PPC Controllers series. It has series designation 1 and design version 2. The standard-design unit uses a RECO housing for installation in a compatible RECO assembly. Its IP20 protection category guards against contact with fingers and solid objects larger than 12.5 mm but does not provide water protection. Memory expansion is not equipped.

The unit operates at a rated supply voltage of 24 VDC and draws a maximum current of 0.7 A. Its I/O bus supports a maximum current of 2.3 A at 24 V and 3.0 A at 5 V, with maximum I/O bus power of 52 W. A ControlNet CNS01 fieldbus slave interface connects the unit to a ControlNet network as a slave device.

Three digital inputs receive discrete control signals, and each input requires at least 10 mA. Two digital outputs provide discrete control signals with a maximum output current of 0.5 A. The maximum output delay is 400 µs, indicating the longest response interval for an output-state change. The ready relay supports up to 150 mA for signaling the unit’s operational status.