PPC-R01.2N-N-P2-FW

PPC-R01.2N-N-P2-FW is a Bosch Rexroth Indramat unit in the PPC Controllers series. It has series designation 1, design version 2, a standard design, and a RECO housing configuration for installation in a compatible RECO system. The IP20 protection rating provides protection against contact with fingers and solid objects larger than 12.5 mm, but not against water. The unit is 192 mm high, 41.5 mm wide, and 150 mm deep, and it weighs 1.1 kg.

The controller operates from a nominal 24 VDC supply and draws a maximum current of 0.7 A. Its I/O bus can provide up to 52 W, with maximum I/O supply currents of 2.3 A at 24 V and 3.0 A at 5 V. Three digital inputs receive binary control signals, while two digital outputs transmit binary switching signals. Each output supports a maximum current of 0.5 A and has a maximum delay of 400 µs. The ready relay is rated for 150 mA and provides an operating-status signal.

A DPS01 Profibus fieldbus slave interface connects the controller to a Profibus master for cyclic data exchange. Memory expansion is not equipped, so the unit uses its installed memory configuration without an additional expansion module.