VT-HNC100-1-2X-W-08-0-0

VT-HNC100-1-2X-W-08-0-0 is manufactured by Bosch Rexroth Indramat as part of the VT-HNC Digital Axis Controllers series. It uses the HNC100 digital NC control platform, belongs to component series 2, and is configured to control one hydraulic axis. The controller has no bus connection and does not include an inductive position sensor. Its wall-mounting design allows installation on a suitable vertical surface.

The controller uses a 16/32-bit MC68376 processor to execute axis-control functions. It provides eight digital inputs/outputs for exchanging binary control and status signals with connected equipment. The encoder input supports frequencies up to 250 kHz for processing position feedback, while the RS232 interface operates at 9.6 KBaud for serial communication.

The reference voltage is ±10 V for analog signal referencing. The voltage input resistance is 200 kΩ with a tolerance of ±2%, limiting the load placed on connected voltage sources. The voltage output supports a 1 kΩ load, and the current output supports a 500 Ω load. Power consumption is 8 W during operation. The unit measures 71 mm in width, 155 mm in height, and 204 mm in depth, and it weighs 1.0 kg.