B506-7001

B506-7001 is a Danaher device in the Timers and Controllers series. It operates in repeat-cycle mode for recurring timed control sequences and has repeat accuracy of 0.01%. The dual-line display uses four-digit, 8 mm seven-segment LEDs to show timing and operating information. Control signals are accepted from an NPN device or dry contact, with an input activation time of 21 ms and an input impedance of 10 kΩ.

The output configuration consists of two SPDT relays rated at 5 A, providing changeover contacts for controlling connected loads. Output latency is 15 ms, and the electrical service life is 100,000 cycles. EEPROM memory retains stored settings when power is removed. The unit accepts an 85–264 VAC supply at 50/60 Hz and consumes less than 10 VA at 240 VAC.

An 11-pin plug-in socket provides the electrical connection and supports installation or replacement without direct hardwiring to the unit. The housing measures 48 mm in width, 48 mm in height, and 85 mm in depth, and it installs in a 45 mm by 45 mm panel cutout. The front panel has an IP65 rating, providing protection against dust and water jets when properly installed.