13.F5.B1D-390A

13.F5.B1D-390A is a KEB axis drive in the F5 Combivert Axis Drives series and the Combivert F5 product series. Inverter size code 13 identifies its power-stage size, while the D housing type indicates its physical housing configuration. The drive uses a three-phase 400 V AC input supply. It has a rated current of 12 A and supports a maximum current of 25.9 A. General maximum motor power is 7.5 hp, and the maximum motor power for a 230 V Unit B configuration is also 7.5 hp.

The BASIC control type provides open-loop flux-vector control without motor feedback, and its 2 ms control scan time enables rapid processing of control commands. The interface has 17 control terminals, including five digital inputs and one analog input for receiving discrete and variable control signals. Its PNP digital logic uses positive-voltage switching. Two relay outputs provide isolated switching signals for external equipment. Motor PTC evaluation monitors a connected motor thermistor for an overtemperature condition.

The integrated GTR7 braking chopper controls energy transferred to a braking resistor during deceleration. A braking transistor is installed to support this braking function. The drive carries EMC class C1 for its electromagnetic-emissions category. Its IP20 enclosure protects against finger contact and solid objects larger than 12.5 mm, but it does not provide water protection.