S20360-VTS

S20360-VTS is a Kollmorgen unit in the S200 Servo Drives series. It operates in velocity or torque mode to control motor speed or output torque. The drive supports 120/240 VAC at all current levels and provides 1,100 W of continuous power from a 240 VAC three-phase supply. Its line current is 5.0 ARMS at 240 VAC three-phase, while the output current rating is 3 ARMS continuous and 9 ARMS peak. Peak current can be maintained for 3.0 seconds to support short periods of increased load. The inrush peak current is 140 A from zero to peak.

With a 240 VAC input, the nominal DC bus voltage is 320 VDC. Bus energy absorption is 15.5 J, allowing the bus to absorb returned energy during motor deceleration. The 20 kHz ripple frequency controls the drive’s high-frequency current modulation, and the maximum current-loop bandwidth is 3 kHz for current-control response. Compatible motor inductance ranges from a minimum of 2.5 mH to a maximum of 150 mH. The drive supplies 500 W of shaft power at 3,000 rpm and 40ºC.

SFD and Hall feedback are supported on all units for motor position and commutation feedback. SFD/Comcoder feedback uses a CAN option card, while EnDat 2.1 and sine-encoder feedback use a SynqNet option card. There is no electrical option. The enclosure measures 175.28 mm in height, 54.75 mm in width, and 131.57 mm in depth, providing the physical dimensions needed for cabinet installation.