S60100

S60100 is a Kollmorgen unit in the S600 Servo Drives series. It supports an operating voltage range of 230 to 480 V and uses a 24 VDC auxiliary supply for control circuitry. Its current rating is 1 A rms, and the rated installed load is 1 kVA. The output-current form factor is 1.01, indicating that its RMS output current remains close to the corresponding average current.

The supported load inductance ranges from a minimum of 25 mH to a maximum of 150 mH, establishing the acceptable inductive load range. The maximum common-mode voltage is 10 V, which limits voltage shared relative to the reference potential. Input resistance to analog ground is 20 kOhm, controlling the loading applied to connected analog signals. The residual voltage drop is 5 V, representing the voltage retained across the relevant output path during operation.

An internal 66 Ohm brake resistor dissipates regenerated energy during motor deceleration. A 33 Ohm external brake resistor can provide additional regenerative-energy dissipation. Quiescent power dissipation is 15 W when the drive is not supplying its rated output, while dissipation at rated current is 30 W. Noise emission is 45 dB(A). The IP20 enclosure prevents contact with hazardous internal parts and protects against solid objects larger than 12.5 mm, but it does not provide water protection.