6410-030-N-N-N

6410-030-N-N-N is a Pacific Scientific drive in the 6410 Stepper Drives series. It supports a maximum RMS phase current of 5 A for continuous motor operation and a peak phase current of 7.1 A for short-term current demand. The 20 kHz chopper frequency regulates current delivery to the motor, while the bus overvoltage trip activates at 83 VDC to protect the drive from excessive bus voltage.

Without an input filter, the maximum step rate is 2.0 MHz, allowing the drive to process up to two million step commands per second. The minimum step-pulse width is 250 ns, which sets the shortest accepted command pulse. A direction setup time of 50.0 µs requires the direction signal to stabilize before a step command. The enabled-output saturation voltage is 0.5 V maximum, limiting the voltage drop at the enabled output.

The maximum chassis temperature is 60ºC. The unit measures 5.00 inches in height, 1.50 inches in width, and 4.30 inches in depth, and it weighs 1.0 lb. This configuration has no connector kit, no cover, and no heat sink.