P50B07040HXS3B

P50B07040HXS3B is a Sanyo Denki servo motor in the P5 Super BL Servo Motors series, with the product series identified as P5 motor. It uses brushless motor technology and a permanent-magnet excitation system to produce motion without mechanical brushes. The motor has a rated output of 400 W and operates from a 200 VAC power supply. Its rated speed and maximum speed are both 3000 min^-1, and its continuous time rating permits ongoing operation under rated conditions.

A wiring-saved incremental encoder serves as the detector, reducing detector wiring while providing position and speed feedback. Its encoder resolution is 2000 pulses per revolution. The motor has a 76 mm flange for mounting and includes a shaft seal to limit contaminant entry around the shaft. It has a fully closed, self-cooling enclosure that dissipates operating heat without external forced cooling. The IP55 protection rating provides resistance to dust ingress and water jets. The motor is not equipped with a holding brake.

Its insulation resistance is at least 10 MΩ when tested at 500 VDC. The dielectric strength is 1500 VAC for one minute, indicating the insulation’s ability to withstand the stated test voltage. The vibration grade is V15.